112 Old Venters Lane, Hubert, NC 28539

Description

The beginnings of a Barndominium! A barndominium is a metal building, sometimes quite large, that usually has room for both living quarters and a shop or garage area. Barn is 30x72 with loft 30x15 designed to have a full bath. The floor plan has had rough plumbing added for kitchen, laundry, and baths. You can pick it up from here and decide what will be living quarters and what will be garage or shop. The building is from World Wide Steel Buildings from Peculiar, MO. The walls and roof are 29 ga steel. The metal sheets, wall and roof, have a radiant barrier sheeting underneath. The barrier for the walls is between the steel panels and the insulation panels. There is a partial roll of the radiant barrier film inside the building. The frame is structural steel with 6'' Square tubing post that have 6''x 11'' steel bottom plates bolted 18'' deep into the concrete with 5/8'' hook bolts as per the foundation plans. The slab is 6'' thick poured over a raised and compacted crushed rock bed with 4' x 4' x 2' deep footings for each post. The building design is certified by a NC Professional Engineer and has a 143 mph Wind Speed rating. His stamp is on the plans. The slab was designed by Kenneth H. Lacy, Professional Engineer in Cape Carteret. His stamp is on the foundation plans. All copies of the engineered plans for the foundation and building as well as the septic drain field will be left inside the building on the table. Also the design plans for the components of the building structure as well. There is a copy of the floor plan for the mezzanine. It is to have a 3/4'' plywood subfloor then framed on that. Seller leaving new in the box septic pump.